New Glass Insert Designs

New designs for our doors and all available in glass inserts.

How to install glass insert into door

Installing a glass insert into your door is easy and does not require anything more than a good jigsaw, a drill, 5/8 drill bit, a tape measure and or square ruler, caulk, pencil and screw driver. You don't need to be a woodworker or master craftsman to do this. You can take any flush panel door; wood, fiber glass, metal, new or used and add a glass insert to turn it into something unique and special.

First step is using the frame of the glass insert to draw your cut line on the door. There are two sides of each frame, make sure the outside of the frame is facing up and that you are tracing the smaller side. The door shown here is a fiber glass door I picked up at my local lumber supply company for $186. Measure once, measure twice and what the heck measure a third time. Make sure it is square, centered and where you want your glass to go.

Next, drill holes in the corners. Make sure the holes are big enough for your jigzaw blade to fit into. Don't drill too close to the cut line, use your jigzaw to make the close cuts.

Tape the outside of the cut line. This will protect the door from the jigsaw. Avoid any scratches or marks. Also, make sure you use painter's tape so you don't leave any gummy tape residue.

Using a good jigsaw with a blade long enough to go through a 1 3/4" door, cut along the pencil out line of your frame.

Carefully remove the cut out. When making your final cuts be sure to hold up the cut out with either tape or a second pair of hands. Don't let it fall out. It will tear the edge of the facing.

Insert one side of the frame. Caulk the frame onto the door. Make sure you have plenty of caulk around the frame, let it ooz out onto the door. This is important, you don't want any moisture to get in between the frame and the door. Install the outside frame first, you will know it is the outside since it does not have any predrilled screw holes.

Paint, stain, seal your door. Install the glass, again use caulk to secure the glass into the frame. Screw on the inside frame and voila your door is done. A door you won't find anywhere else. It took me about two hours to complete this project.

8 ft double doors with sidelites

Here is an entrance door we recently did in Chicago. Simple door design with two sidelites.

Client photos

Here are some photos a client sent in recently on the single panel glass door with two sidelites. Notice how the light is hitting the floor creating a new pattern. This pattern will move and shift throughout the day as the sun moves and changes the angle it hits the glass. Also, the pattern will be different depending on the season and how high the sun is in the sky.

Here are some photos a client sent in on the single panel glass door with two sidelites. Notice how the refracted light is hitting the floor.

New Doors

We have changed our designs and are offering new designs. These new designs will allow us to sandwich all the art glass between tempered glass. The designs will also significantly lower shipping costs. More info to come soon.

recent work

This is a leaded glass sidelite, part of a larger entryway. I did the design and my father fabricated the window. 

This is a new leaded glass door. The door is made of black walnut, the center is made up of all clear glass, rondels, heavy and weak seedy.

leading 2 sidelites

These two sidelites are part of a 8 foot double door entryway going to Chicago. A real monster entryway. The glass is made up of rondels, heavy and weak seedy.

installing glass into door

Many times clients, contractors, architects want to know how the glass is installed in the door. For many of the designs seen on the website the art glass is installed up against the tempered insulation glass facing the inside. Here is how we do it. 

We start with a door I get from one of several suppliers. I get the door with no glass. 

I also get a double pane of tempered insulation glass. This is what provides all the insulation and protection from the outside. This panel is 7/16" thick.

After applying a sealer on the exposed wooden back stop I run a bead of caulk around the edge. This will seal the unit from the outside elements.

I place the double pane of tempered clear glass up against the caulked back stop. 

Then we put the art glass up against the tempered unit. This is facing the inside of the door. The art glass is exposed to the inside of the home or building.

The last step is putting the inside stops up against the art glass to keep everything in place. 

New Door Design

Sometimes a client pushes you into a new direction. Two months ago I got a call from a client in California who wanted a door, but not one currently listed on the kuhldoors website. He had seen a door in the gallery but wanted it turned into one panel. We went through the Simpson Doors door selection to pick a door and vala we have a new design.

Not a great picture but you get the idea. Not bad.